Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (2023)


Prosthetic lenses fulfill a functional and a cosmetic need for damaged or disfigured eyes.

By Dawn Lam, BSc, MSc, OD, FAAO

Colored soft contact lenses have the ability to influence and change perceived eye colors. There are two distinct types of patients who can benefit from colored soft contact lenses: those who have disfigured or diseased eyes, and those who have normal eyes but are looking for a day-to-day cosmetic change.

Patients who are looking for a cosmetic change to their iris can be fit into frequent replacement colored soft lenses (see sidebar on page 39). These lenses are available in a limited range of colors and parameters, and they have pre-determined iris and pupil diameters. Several of the major contact lens manufacturers offer these options.

Patients who need to mask an ocular disfigurement or who have certain eye diseases should be fit into a prosthetic soft contact lens. These patients need a lens that contains pigments dense enough to hide a scar or injury to the ocular surface. They may also need a prosthetic lens to fulfill a functional need (for example, iris or pupil occlusion). Prosthetic evaluations can be very rewarding, but there are many factors to consider for success.


Common indications for prosthetic soft contact lenses include aniridia, iris coloboma, ocular albinism, leukocoria, leukoma, diplopia, micro-cornea, and iris atrophy. Most patients who have iris irregularities also have symptoms of glare and photophobia. They would need a contact lens that provides iris occlusion, and their symptoms will be reduced as a result of the smaller pupil diameter.

Patients who have scarred or white opacified corneal abnormalities are usually self-conscious of their physical appearance. Patients who have these abnormalities will typically have little to no light perception, so vision is not usually their primary goal. They would benefit from a lens that can mask the ocular disfigurement. The patients’ functional need will dictate which type of prosthetic contact lens is best suited for them.

Iris and Pupil Occlusion

An iris occlusion prosthetic contact lens has iris pigment on the front surface (Figure 1a) and a black backing on the back surface (Figure 1b). These lenses can have varying pupil diameters, with a clear/open pupil or a black/closed pupil. Iris occlusion lenses are ideal for patients who have fixed, dilated pupils and symptoms of glare and photophobia. It is not always necessary to incorporate iris pigment to the front surface of the lens. Patients who have dark iris colors may be able to attain a suitable cosmetic match with a simple black iris occlusion lens (Figure 2-A).

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (1)

Figure 1a. An iris occlusion lens with the iris color to match a patient’s natural iris color.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (2)

Figure 1b. An iris occlusion lens showing the black iris backing.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (3)

Figure 2. Clockwise from top: (A) an iris occlusion lens with an open pupil; (B) a pupil occlusion lens with a translucent, tinted iris; (C) both an iris and pupil occlusion tinted lens; (D) a pupil occlusion lens with a translucent, tinted iris; and (E) a pupil occlusion lens with a clear iris.

A pupil-occluding prosthetic contact lens has an opaque (black) pupil area and either a clear (Figure 2-E) or pigmented iris (Figures 2-B and 2-D). This type of lens does not provide any vision, but is ideal for patients trying to hide a white pupil, an opaque central corneal opacity, or for vision occlusion. Prosthetic contact lenses can be designed with both iris and pupil occlusion (Figure 2).

Pupil diameters can be designated to match a patient’s normal eye. In an iris occlusion lens, a small diameter open pupil will reduce symptoms of glare and photophobia; however, as the diameter of the pupil is reduced, the patient’s field of view is also restricted. This restriction can be bothersome to some patients, and a compromise is needed to balance visual comfort (less glare) and patients’ field of view.

An important consideration is patients’ daily activities. For a patient who spends the majority of his time outdoors, match the final pupil diameter to his normal pupil in bright illumination; for a patient who spends the majority of his time indoors, match the final pupil diameter to his normal pupil in dim illumination. Although not a necessity, when a pupil-occluding contact lens is needed, an associated iris color match can be designated to match the natural iris color.

(Video) What we look at in a contact lens! (toric)

Types of Prosthetic Contact Lenses

Many laboratories offer prosthetic soft contact lenses, which can be classified into three general types:

1) Tinted, translucent lenses in which there is a homogenous color throughout the iris template on the lens.

2) Computer-generated, printed lenses in which the color is pre-determined.

3) Hand-painted lenses in which iris color and diameters are completely custom.

All prosthetic soft contact lenses are replaced annually. Depending on the contact lens type, patients can be prescribed hydrogen peroxide or multipurpose contact lens care solutions.

Tinted Lenses Tinted lenses offer a homogenous, translucent color throughout the iris template (Figures 2 and 3). Details such as iris nevi, corneal arcus, and pupillary ruffs cannot be added to a tinted lens.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (4)

Figure 3. A variety of tinted, translucent lenses.

Consultation with the laboratory is necessary to determine availability of iris and pupil diameters. Usually, pupil and iris diameters can be customized, and an open or black pupil can be added to tinted lenses, if warranted. Complete pupil occlusion can be difficult in some tinted prosthetic contact lens designs if the black pupil pigment is not dense enough. Iris occlusion is not always possible; these contact lenses are translucent, and a full iris occlusion will result in a black iris (Figure 2-A).

Note: with these types of tinted prosthetic contact lenses, you can designate either the iris color or the black iris back but not both. In addition, the iris pigment in these contact lenses is usually not dense enough for patients who have light-colored irises to achieve a good cosmetic match. For such patients, consider printed or hand-painted prosthetic contact lenses in which iris details are possible to aid in the overall iris color match.

An alternative use for translucent tinted prosthetic contact lenses would be for low vision patients who need to wear a dark filter to improve visual function. Some trial and error may be necessary to achieve the correct tint, and patients should be educated that the lens may alter their perceived iris color, especially in patients who have lighter-colored eyes.

Computer-Generated Lenses Computer-generated prosthetic contact lenses have pre-determined iris colors and diameters (Figure 4). Some designs allow for layering of different colors to achieve the desired iris color effect. This type of contact lens is reproducible and provides good repeatability.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (5)

Figure 4. Examples of computer-generated or printed lenses. All of these lenses have a clear iris back. The lenses on the left have open pupils, and the lenses on the right have black pupils.

Full iris or pupil occlusion is possible by specifying a black iris backing while also specifying the appropriate front iris color for the patient. A black iris backing will provide patients with full iris occlusion, and a clear iris backing will provide patients with a partial iris occlusion (Figures 5-A and 5-B). It should be noted that a black iris backing can influence the perceived iris detail and color on the front of the lens, which needs to be taken into consideration when color matching. Unlike tinted prosthetic contact lenses in which iris and pupil diameters are customizable, for computer-generated lenses there are limitations to the template sizes available. In addition, the pre-determined range of colors may not be suitable for every patient.

(Video) Step By Step Duette Videos Fitting Guide

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (6)

Figure 5. The front and back of computer-generated prosthetic lenses with a clear iris backing (A) and black iris backing (B). Note that the blue iris color on the front of the lens is the same computer-generated color, but the overall perceived color is different because of the iris backing.

Hand-Painted Lenses Hand-painted prosthetic contact lenses are completely custom (Figures 6-A and 6-B), so you must consult the laboratory prior to fitting a patient. They are available in any iris and pupil diameter. A photo of the patient’s normal eye needs to be sent to the laboratory so that the iris color and details can be custom painted to match. The laboratory will paint the iris onto a clear contact lens, and a black or a white iris backing can be specified. When ordering these contact lenses, a black iris backing (iris occlusion) will cause the surface color to look darker and deeper versus a white iris backing. Be sure to communicate to the laboratory at the beginning of the ordering process whether a patient will need a black iris backing to reduce glare and photophobia. Hand-painted prosthetic contact lenses provide the most opportunities for customizing to suit each patient’s needs.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (7)

Figure 6. Examples of hand-painted prosthetic contact lenses.

Prosthetic Soft Contact Lens Evaluation

Color Matching The first consideration during a prosthetic contact lens fitting is determining the patient’s natural iris color. The patient should be evaluated in an examination room, and privacy should be maintained. Best results are obtained when room lighting is consistent at each follow-up visit. Ideally, the examination room walls should be a neutral grey color. You should have access to both indoor and outdoor illumination to evaluate iris colors. To ensure accurate iris color match from one week to the next, instruct the patient to wear white or black clothing; a white or black cloth covering kept in the office can also be laid over the patient’s clothing.

In a busy prosthetic contact lens practice, it would be advantageous to have a series of tinted prosthetic contact lenses from your laboratory of choice to be used as the basis of a fitting set. A fitting set consisting of light, medium, and dark iris colors would provide a good starting point when color matching to a patient’s natural iris color.

If a hand-painted prosthetic contact lens is needed, then a photo printer is necessary because digital images will have different color tones on different computer monitors. Once a photo is printed, the iris color in the photo can be compared to the patient’s natural iris color while the patient is in the examination room.

The choices are more plentiful for brown eyes. Tinted, printed, and hand-painted prosthetic contact lenses are all potential options for such patients. Green, grey, or blue eyes are limited to a printed or a hand-painted contact lens to ensure a good cosmetic match. In most cases, the pigment in a tinted contact lens would not be dense enough to conceal scars for light-colored irises.

Prosthetic lenses are all prescribed for annual replacement. Advise patients that tinted and hand-painted contact lenses gradually fade over a 12-month period. Computer-generated lenses are less likely to fade, but should still be replaced annually. Consult with the laboratories for recommended contact lens care products; some can accelerate the contact lens fading process. If a particular lens care product is contraindicated, avoid using that lens care solution even during the clear lens fitting process, and make sure to educate the patient appropriately. Usually, a lens care product is contraindicated because of a particular ingredient or preservative.

Contact Lens Parameters The second consideration is the patient’s vision. A patient who has a refractive error will need his refractive correction incorporated into the contact lens powers. In addition to base curve, lens power, vision, and overall diameter, also document the normal iris color, iris diameter, and pupil diameter (in dim and bright illumination). The final lens pupil diameter will be dictated by a patient’s occupation and activities of daily living.

The soft contact lens should be comfortable and should fit well on the patient’s ocular surface. Patients who have irregular corneal surfaces may require custom base curve adjustments. Document contact lens centration, and adjust the overall lens diameter if possible to ensure full coverage of the cornea. A contact lens that does not center well on the cornea will expose the underlying ocular tissues and will not result in an orthophoric eye position. Increasing the diameter may be necessary to provide a large enough contact lens to hide any ocular abnormality (Figure 7-A). If the center of the contact lens does not correspond to an orthophoric position for the patient, then a hand-painted prosthetic lens is the only choice, as this allows the iris artistry to be decentered (Figure 7-B).

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (8)

Figure 7. When the iris artistry needs to be decentered (A), a large-diameter soft lens (B) can be fitted and painted to match the patient’s natural iris colors.

Although a soft contact lens will not change the dimensions of the palpebral fissures, the vertical palpebral fissure opening should be measured and compared between the two eyes. This documentation can be monitored over time.

(Video) Best Contact Lenses For Keratoconus

Consult the laboratory with the first step of the lens order. Because the majority of prosthetic contact lenses are not trials, each contact lens will have a material fee. Silicone hydrogel contact lenses cannot be tinted and, as such, patients are limited to traditional hydrogel contact lenses.

Whenever possible, order a clear contact lens with the appropriate contact lens parameters to confirm fit, vision, and comfort. Re-ordering a clear contact lens to adjust the parameters is more cost efficient compared to re-ordering a custom-tinted prosthetic contact lens. When the clear contact lens fit is finalized, send the contact lens that the patient has been successfully wearing to the lab for the final color to be incorporated.

In addition, some laboratories require patients to be fit into a contact lens of the laboratory’s choosing. Success is more easily achieved if the laboratory guidelines are followed. Often, the only requirement is a 55% water content hydrogel contact lens. If this is the case, you can choose from a number of custom annually replaced contact lenses. Such clear lenses are available in base curve radii of 6.0mm to 11.0mm and in overall lens diameters from 10.0mm to 24.0mm; sometimes, further customization is possible. These contact lenses also are available in both sphere and toric lens designs.

Safety or protective eyewear is important for all prosthetic lens patients. In addition, power in the spectacle lens can be adjusted to help magnify or minimize a disfigured eye as needed. For example, a patient who has a smaller ocular socket and eyeball may benefit from a plus-power spectacle lens to provide good symmetry in size between the two eyes.

Type of Disfigurement The final consideration is the type of ocular disfigurement. Does the patient have an opacified cornea or an iris abnormality? A patient who has an opacified cornea will likely need both a pupil and iris occlusion contact lens. A patient who has an iris abnormality will need an iris occlusion contact lens with an open pupil.

Cases in Point

Case #1: Tinted Lens A 75-year-old female with a history of cataract removal and a subsequent retinal detachment presented with a white opacified cornea and complaints of being self conscious of her physical appearance. Our evaluation confirmed no light perception, an opacified cornea, and a relatively equal palpebral fissure opening (Figure 8-A). We trialed both tinted and computer-generated prosthetic soft contact lenses.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (9)

Figure 8. A patient who has a left opacified cornea before prosthetic lens fitting (A), and the same patient now wearing a tinted translucent prosthetic lens (B).

Although the computer-generated lens was able to provide a good color match, the iris diameter of 12.0mm was too large compared to the patient’s normal right eye (11.5mm). A tinted lens also provided a good color match, and the availability of different iris and pupil diameters provided the customization that this patient needed. A tinted, translucent lens with an 11.5mm iris diameter and 3.5mm black pupil diameter was finalized for this patient (Figure 8-B).

Case #2: Hand-Painted Lens A 63-year-old male patient presented with a history of a traumatic iris injury at the age of 4 years. He reported cataract removal at the age of 8, and he is currently best corrected to 20/400. Our examination confirmed that this patient had a fixed, dilated pupil (Figure 9-A). He had symptoms of glare and photophobia.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (10)

Figure 9. A patient who has an irregular pupil secondary to iris trauma (A), and the same patient now wearing a hand-painted prosthetic lens (B).

The patient’s natural iris was a light blue-grey color. We successfully matched the patient in a hand-painted prosthetic lens with an 11.5mm iris diameter, black iris backing, and a 3.5mm open pupil to preserve his 20/400 vision. We also requested a light white opaque sclera to help mask the underlying eye color because of a slight lens decentration (Figure 9-B).

Case #3: Computer-Generated Printed Lens A 75-year-old male patient presented with complaints of glare and poor vision from a left traumatic iris injury. Our examination confirmed that he had a fixed, dilated pupil and was best corrected to 20/40. The patient is currently having difficulties with glare and diplopia (Figure 10-A). He was unable to tolerate a pupil occlusion lens on his left eye.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (11)

(Video) Ocular Surface Disease & Rehabilitation with Scleral Lenses: Fitting & Troubleshooting

Figure 10. A patient who has an irregular pupil secondary to iris trauma (A), and the same patient now wearing a computer-generated printed prosthetic lens (B).

Currently, the patient is wearing a printed prosthetic lens with a black iris backing, blue iris color, 12.0mm iris diameter, and 4.5mm open pupil (Figure 10-B). He is also wearing spectacles with prisms ground in to eliminate his symptoms of diplopia. CLS

Cosmetic Contact Lenses

Cosmetic contact lenses are ideally suited for patients who wish to enhance or alter their eye color. These lenses can be prescribed for part- or full-time wear. Today’s cosmetic contact lenses are available in both daily disposable and reusable modalities. For patients who plan to be part-time cosmetic lens wearers, consider daily disposable lenses, if possible; this eliminates the need to store a worn cosmetic lens in lens care solution for days or weeks at a time. Some lens care products allow for storage in the same solution for up to 30 days, while others need to have the solution replaced every seven days. Extended storage in lens care solution lends itself to the risk of forgetting to re-clean the lenses before their next wear.

These lenses are available in either silicone hydrogel or hydrogel lens material, depending on the manufacturer. Cosmetically colored lenses in silicone hydrogel material are relatively new to the contact lens market. This material offers increased oxygen transmissibility to patient corneas.

Patients also should be educated that these are medical devices and should not be purchased without a prescription. This can be difficult for patients to understand, especially those who do not have a habitual spectacle prescription.

Color Options

Cosmetic contact lenses are available in a range of colors and designs including opaque colors, enhancer tints (primarily for patients who have light irises), and limbal ring designs. The opaque and enhancer cosmetic tints alter the perceived iris colors, whereas the limbal designs are meant to enhance a patient’s existing iris color. Trial lenses are available from most manufacturers. Encourage patients to try on the lens to determine the effect most suitable for them. To streamline this process, first determine patients’ goals. For patients who are seeking a dramatic change in their perceived eye color, start with an opaque lens; for patients who are looking for a subtle change, consider an enhancer tint or a limbal design lens. Narrowing patients’ goals will give you some guidance in choosing the right lens for each patient.


If a patient is interested in being fit with a cosmetic lens, it is best to evaluate the patient in a clear lens of the same material, water content, base curve, lens diameter, and lens power, preferably from the same manufacturer. It is important to note that cosmetic lenses are available only in limited parameters. The patient should wear the clear lens for a week before being evaluated at a follow-up visit to confirm good ocular health, vision, and lens comfort. Once the contact lens fit is finalized, the final lens can be ordered in the cosmetic design. Most companies have a companion lens within their brand that is similar if not identical in lens parameters.

The difficulty comes when a patient requests to be fit in a cosmetic lens that is specialized or customized, such as those that are commonly requested at Halloween or for theatrical use. If a patient is requesting such a lens, I would advise that the fitting procedure be similar to that for a prosthetic lens. The lab should be consulted regarding the final lens diameter, base curve, and material, and the patient should also be fit in a companion clear lens before the final cosmetic design is ordered.

As eyecare practitioners, we need to decide how best to ensure the safety of our patients’ ocular health. The difficulty in fitting cosmetic lenses is not usually in the fit itself, it is in the management of our patients.

Contact Lens Spectrum - Soft Contact Lenses for Prosthetic Fitting (12)

Dr. Lam is an associate professor who teaches cornea and contact lenses at the Southern California College of Optometry at Marshall B. Ketchum University.

(Video) Step By Step Duette Videos Hybrid Lens Design


What is a prosthetic contact lens? ›

Prosthetic contact lenses at Family Eye Care are special lenses that cover the cornea if the cornea has become cloudy or opaque. The special lens is made to match the other eye and therefore improves the appearance of a disfigured eye.

How much does a prosthetic contact lens cost? ›

“These lenses tend to cost from $750 to $1,000 per lens.

How do I know if my soft contact lens fitting? ›

push-up test — assessing the tightness of the lens is a measure of the fitting relationship of the lens with the eye. It is the most effective way to judge the dynamic fit of the lens. The practitioner moves the lens vertically, through pressure on the lower eyelid, using the finger.

Why would the doctor prescribe black pupil painted lenses? ›

A pupil-occluding prosthetic contact lens has an opaque (black) pupil area and either a clear (Figure 2-E) or pigmented iris (Figures 2-B and 2-D). This type of lens does not provide any vision, but is ideal for patients trying to hide a white pupil, an opaque central corneal opacity, or for vision occlusion.

What are the benefits of soft contact lenses? ›

Advantages of soft contact lenses

Soft contact lenses tend to be very comfortable initially. They drape over the eye, so patients don't feel them much when blinking. SCLs tend to stay on the eye without becoming dislodged or displaced.

What is a prosthetic eye made of? ›

Today, a prosthetic eye is generally made of hard, plastic acrylic. The prosthetic eye is shaped like a shell. The prosthetic eye fits over an ocular implant. The ocular implant is a separate hard, rounded device that is surgically and permanently embedded deeper in the eye socket.

Is there a contact lens that blocks vision? ›

Occlusion (covering up one eye's vision) involves a black-centered contact lens that is subtle, as opposed to a frosted glasses lens or eye patch. Prosthetic contact lenses can be as simple as a solid color to an advanced hand-painted iris design to look as much as your natural eye as possible.

Can contact lenses hide strabismus? ›

An opaque colored lens might hide a strabismic eye that wasn't successfully treated in childhood. They can also be used to eliminate diplopia and acquired symptoms such as imbalance or photophobia, or disfigurement related to stroke, palsy, myopathy or trauma. Masking disfigurement.

How much do cosmetic contacts cost? ›

Daily disposable color contact lenses cost between $45 and about $90 per month. Extended wear lenses, which can be worn from one week to three months, cost between $12 and $90 for a monthly supply. Lenses designed for long-term wear, which are replaced annually, cost between $55 and more than $200.

Can you sleep with prosthetic eye? ›

Some patients do take the artificial eye prosthesis out overnight, but any longer than this can cause problems. We advise that cosmetic shell prostheses are not worn overnight, so these should be left out while sleeping.

How long should I wear my prosthetic eye? ›

How long should I wear my artificial eye? So long as your eye is comfortable you can wear it all the time. But you must remember to take it out and clean it regularly.

How long does a prosthetic eye last? ›

How often should I replace my prosthetic eye? The integrity of the materials of a prosthetic eye made at Ocular Prosthetics, Inc. will last for at least ten years. However, most people will need a replacement at approximately 3-5 years due to the settlement of soft tissue in the eye socket.

Are there contacts that work like sunglasses? ›

Our Gaddie Eye Centers eye doctors are pleased to offer a revolutionary solution – the new ACUVUE® OASYS with Transitions™ Light Intelligent Technology™ contact lenses. These contact lenses that can act like sunglasses were given FDA approval in April 2018.

Are there multifocal contact lenses? ›

Multifocal contact lenses come in both soft lens and rigid gas permeable (RGP, or hard) lens materials. There are two main types of multifocal contact lens designs. The most common is a set of concentric circles of lens powers prescribed for various viewing distances.

Do transition contact lenses exist? ›

ACUVUE® OASYS with Transitions™ Light Intelligent Technology™ is the first-of-its-kind contact lens that seamlessly adapts to changing light, day to night.

What is the strongest prescription for contact lenses? ›

What is the strongest contact lens prescription? Contact lenses can be prescribed for extreme degrees of myopia, even for those who need correction of more than -20 Dioptres. Some lenses can go over -30 Dioptres. For monthly soft contact lenses, the highest level of corrective power is about -12 Dioptres.

What contact strength is considered legally blind? ›

In the United States, a person has legal blindness if: Their vision with glasses or contacts is 20/200 or worse. Their visual field is 20 degrees or less in the better-seeing eye.

How soon can you wear contacts after Strabismus surgery? ›

We generally advise that contact lens wears not be resumed until the swelling and soreness have resolved (usually 1-2 weeks).

Is there a contact lens that blocks vision? ›

Occlusion (covering up one eye's vision) involves a black-centered contact lens that is subtle, as opposed to a frosted glasses lens or eye patch. Prosthetic contact lenses can be as simple as a solid color to an advanced hand-painted iris design to look as much as your natural eye as possible.

Are glasses considered prosthetics? ›

Since these members lack an internal lens, their contact lenses or eyeglasses are considered to be prosthetics.

Can contact lenses hide a lazy eye? ›

Astigmatism, or an irregular curve in the cornea, in one eye can also cause lazy eye. These causes of lazy eye can often be corrected with eyeglasses or contact lenses.

Can you see through blind contact lenses? ›

If no light is entering the eye and your view is being obstructed by a coloured lens, you will not be able to see. Blind Contacts do exactly that – leave you with no vision. Although you may be able to detect light and shapes, your vision will certainly be impaired.

Can a lazy eye be fixed in adults? ›

Yes! Vision therapy has been shown to greatly improve the visual skills of the lazy eye by re-training the visual system. Recent studies have shown that the neural pathways of the brain can be enhanced at any age—this means that a lazy eye can actually be treated at any age, even into adulthood.

How do you strengthen a weak eye? ›

Eye Circles: While sitting or standing, move your eyes in a clockwise direction 20 times, making the circle as wide as you can. Relax for 10 seconds, then repeat in the opposite direction. Doing this three times daily will help to stretch your eye muscles.

How do you fix a lazy eye in adults at home? ›

Exercises to try
  1. Hold the pencil in front of you (or your child) at arm's length.
  2. Slowly move the pencil as close to the nose as possible, without it becoming blurry or doubled.
  3. Once the pencil becomes blurry, move it away from the nose.
  4. If the pencil contains a visual element, focus on it.
  5. Repeat 5 times.
Jun 30, 2020

How hard is it to see out of blind contacts? ›

Yes. As long as the contacts don't cover your pupil, your vision will be impaired minimally, if at all. Some styles of contact lenses such as the white mesh and the 'dead eye' will partially or completely block your vision.

Is there a surgery to make the blind see? ›

The procedure used to restore sight in these patients is known as a vitrectomy. The surgery removes the jellylike tissue behind the lens of the eye and replaces it with a saline solution.

What do mesh contacts look like? ›

Now these, these are White Mesh Contacts, if you'll notice there's a lot of tiny black dots on the lens, each of these are actually just completely clear dots that let your natural eye color come through. However, they'll just appear as black dots because they're too small to really allow color to come through.


1. Caribbean Visual Specialist Contact Lens Seminar
(Spectrum International)
2. Ages for Contact Lens Wear: When is it Appropriate? - Episode 38
(Optometric Insights)
3. Gas Perm Contact Lenses, Scleral Lenses, Ortho K and Myopia Control
(Spectrum International)
4. Scleral Lens Fundamentals
(Woo University)
5. Dr. Donald Korb Talks Advancement of Contact Lenses
(Eyes On Eyecare - Optometry)
6. #Scleral Lens Fitting Basics. How can we go about fitting #sclerallenses? | OOLS | Dr. Stephanie Woo
(Online Optom Learning Series (OOLS))
Top Articles
Latest Posts
Article information

Author: Lidia Grady

Last Updated: 23/08/2023

Views: 5769

Rating: 4.4 / 5 (65 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Lidia Grady

Birthday: 1992-01-22

Address: Suite 493 356 Dale Fall, New Wanda, RI 52485

Phone: +29914464387516

Job: Customer Engineer

Hobby: Cryptography, Writing, Dowsing, Stand-up comedy, Calligraphy, Web surfing, Ghost hunting

Introduction: My name is Lidia Grady, I am a thankful, fine, glamorous, lucky, lively, pleasant, shiny person who loves writing and wants to share my knowledge and understanding with you.